With this section finished, I re-installed the stainless steel grab handle onto frame #2.
It may be hard to discern the difference in the photo... but thats 4 coats of WR-LPU Whidbey White on the right, and only 2 on the left. I didnt see the point in painting 4 coats in the forward area, as it will be covered by the deck. |
The next step will be to either begin assembling the seats, or finish applying the 2nd layer of epoxy to the aft section. Im not sure which Ill do.
Aft section needs a 2nd coat of epoxy before painting. |
These are the decals I ordered. Im looking forward to seeing how they look. |
0 komentar:
Posting Komentar